The Precision Pro Ruger 10/22 Bolt Buffer replaces the factory steel bolt stop pin at the rear of the receiver.
This bolt stop pin stops the bolt from crashing into the rear of the alloy receiver and in doing so transfers that energy to the drilled receiver holes. This abrupt transfer of energy can slowly affect the zero on scoped rifles.
For owners of suppressed Ruger 10/22s, the Bolt Buffer will significantly reduce the cycling noise of the action by eliminating the slap of the steel bolt on the steel pin.
With a steel bolt buffer, repeated cycling will cause elongation of these holes and eventual damage to the receiver. The solution is to replace the plain steel pin with a durable material possessing the proper elasticity to withstand high levels of use.
This bolt buffer is manufactured from polymer that will decelerate the bolt more gradually, slightly reducing the already low felt recoil of your Ruger 10/22.
Installation is a breeze. Just knock out the old pin with a punch and slot in the polymer buffer with your thumb.
For owners of suppressed Ruger 10/22s, the Bolt Buffer will significantly reduce the cycling noise of the action by eliminating the slap of the steel bolt on the steel pin.
For such a small price, this simple modification is a must have!
